January 2016 - TRUEGRID Pavers
Get A Quote Call 1-855-355-GRID Shop

Is the US Facing a Road Dust Crisis?

dust-cloud-banner

What is Road Dust?

Road dust is composed of pulverized loose particles of sand, rock, and other

earthen material that become air borne, mainly due to the interaction of vehicular

traffic on unpaved roads.

A study completed before the turn of the century, nearly 50 percent of America’s

public roads remained unpaved (EPA 1993), and an even larger percentage of

private roads and parking lots. Furthermore, many of these roads are located

near agriculture sites where dust can travel hundreds of feet through the air,

covering crops with debris, contaminating local streams, and causing a nuisance

to local communities.

What are the Potential Hazards of Road Dust?

  1. Obscures the vision of drivers, dust clouds are traffic hazards.
  2. Dust particulate can be carried several hundreds of feet, penetrating nearbyhomes and covering crops. Crop growth can be stunted due to the shading effectand clogged plant pores.
  3. In human health dust is a common cause of allergies and hay fever and aconveyor of diseases according to a United Nation study (United Nations, 1979).
  4. The fine dust particles can be abrasive and therefore greatly increase wear ofmoving parts of vehicles.
  5. The losses of fines (road binder), as dust, represent a significant material andeconomic loss (Colorado Transportation Information Center. #3, 1989).
  6. The fine dust particles are washed off during precipitation and carried intostreams, creeks and lakes increasing their respective turbidities.
dust-field

Common Dust Abatement Practices

There are several common practices for reducing road dust. This process

is called dust abatement. Unpaved roads can be sealed with chemical dust

suppressants made out of synthetic oil based products, molasses and corrosive

rock salts like Sodium Chloride and Magnesium Chloride. It is estimated that the

chemical dust suppressant industry costs road managers $300,000,000 annually.

This is because chemicals must be manufactured, reduced to a concentrate,

shipped, diluted, and sprayed sometimes as often as 3 times per year,

indefinitely.

The EPA recommends that unpaved roads be paved in order to reduce

road dust. TRUEGRID is a proven dust abatement technology. Our permeable

surface captures dust within loose aggregate rock that is then contained within

super tough plastic cells aligned in a grid. When heavy trucks and cars drive on

TRUEGRID, the grid system itself and not the aggregate rock provides virtually

all the load bearing capacity.What that means is that cars and trucks never fully pulverize the

aggregate rock within TRUEGRID, reducing the creation of road dust. Unpaved

roads do nothing to stop turning gravel into air-borne dust from tire traffic.

TRUEGRID stops this process and effectively minimizes dust.

In addition, a TRUEGRID lot can last up to 60+ years and proper

installation ensures virtually no maintenance after TRUEGRID is placed on the

ground. See how easy it is to install TRUEGRID.

What is the Real Danger of Chemical Dust

Suppressants?

In 2002, the EPA released a report calling for more research into the

potential environmental and human health risks of chemical dust suppressants.

Their investigation revealed an almost complete absence of scientific studies into

the effect these chemicals have on the environment. The only studies they could

find were industry performed and focused mainly on the performance of chemical

dust suppressants and not on their effect on humans and the environment.

It is known that chemical dust suppressants have a significant negative

impact on surrounding plant life. Remember that literally tons of dust

suppressants are sprayed on the millions of square kilometers of unpaved farm

roads where food is grown. Dust suppressants can also cause runoff into water

supplies, and could potentially carry other contaminating debris into local streams

and eventually the water table.

duststormcity

Is the US Facing a Dust Crisis?

While a crisis might be an overstatement, we are talking about millions of

square miles of roads pouring dust into the air every day. Add in the tons of

chemicals poured on these roads to reduce the dust problem, and we now have

a problem solved with another problem.

Times Beach, Missouri was a middle class industrial town up until 1982.

Nearby manufacturing and industry plagued the small Missouri Township for

decades. In the early 70s a private contractor was hired by the city to spray a

chemical dust suppressant on the mainly unpaved roads. This went on for years

as residents complained about funny tasting water, and an increase in respiratory

diseases in the town. Eventually it was discovered that the chemicals used

contained lethal levels of dioxin, a then known neurotoxin. This quickly became a

crisis, then an emergency, then a disaster. The federal government sued the

contractor, and eventually had to evacuate and permanently close the town,

which wasn’t reopened to the public until 1999.

AP8212301199

Currently water supplies in Flint, Michigan are at toxic levels due to

chemical runoff into local water supplies. Water supplies have been

contaminated with lead from industrial waste poisoning the drinking water of

residents. Flint, Michigan is an echo of Times Beach. Though the chemicals

involved and the mechanism of contamination are different, both municipalities

are paying a heavy price in human health, and actual dollars due to

mismanagement of chemicals in the environment.

These are not isolated incidents either. Just last year, a contractor to the

EPA contaminated the Colorado River with millions of tons of metals, and

wastewater from an abandoned gold mine. The list goes on. More than a dust

crisis, the US is facing a chemical crisis, and somehow chemicals are still being

used to control dust when there are viable and cost efficient alternatives that

involve no spraying of chemicals. Right now we have an opportunity to learn from

the past and choose a better path for Flint and for America. The eco-friendly

solution that will save lives and money is TRUEGRID.

[Posted on January 15th, 2015 by: Barry Stiles]

 

 

A permeable pavement system combines a series of plastic grids with a fill materials, such as gravel, limestone or sod, to create a durable parking surface that allows moisture to soak into the ground naturally. It is used as an alternative to conventional asphalt or concrete surfaces, which are expensive to install, prone to damage and require complicated drainage systems to control water from rainfall and floods.

Permeable pavement has become increasingly popular in municipalities with aging waste water systems, and it is often used where there is a need for permanent or temporary parking or roads. It can also be used for permanent parking, lawn parking, driveways and erosion control.

Here are some of the advantages that permeable pavement has to offer:

#1 Easy Installation

Permeable pavement does not require expensive specialty equipment like asphalt or concrete surfaces do. For a permanent installation, the ground must be cleared of vegetation and graded, the layer of rock is installed as a base, similar to a concrete or asphalt installation. Then the grids are laid out, and trimmed to fit around any objects. The grids are pallet-sized and light enough to be carried by a single person, making it easy to cover large areas in a very short time. Once the grids are in place and locked together, they are filled with gravel or limestone, and compacted into a strong and durable surface. Due to the strength of the grids, heavy equipment can be used to dump, spread and compact the fill material with proper planning and coordination. Once the grids are filled, they are durable enough to accommodate almost any type of vehicle or equipment.

#2 Durable

Once filled, permeable pavement is as durable as concrete or asphalt surfaces, and in many cases, even more durable. It can support heavy equipment such as wheel loaders, backhoes, fork lifts, dump trucks and 18-wheelers without a problem. Because it is a floating surface and has joints that make it flexible, it can move as the soil beneath it changes. Asphalt or concrete will tend to buckle when conditions like frost cause upheaval, or if the soil underneath is compacted or washed away. Permeable pavement will not crack due to expansion and contraction like concrete, and it is less likely to be damaged and form potholes, like asphalt.

#3 Sustainable

The permeable pavement grids are made from environmentally-friendly recycled materials, which reduces the amount of waste in the system and reduces the energy required to acquire new materials. At the end of their lifespan, they can easily be recycled, further reducing their carbon footprint.

#4 Low Cost

Asphalt and concrete can be expensive to install and require a large amount of labor. Permeable pavement is less expensive per square foot, and is much less labor-intensive. The fill materials can be obtained from local sources, reducing transportation costs, and because the paving grids are made from lightweight plastic, the shipping costs are kept to a minimum.

#5 Can Be Temporary

Sometimes businesses need extra parking on a temporary basis, like during the holiday season or at large sporting events. Afterward, the space may need to be reclaimed for other uses. Permeable pavement can be the perfect solution for temporary parking. The grids can be laid down over a simple bed of gravel or reasonably flat soil, then filled with gravel or limestone to create a temporary parking area. Afterward, the grids can easily be removed and stored for the next time they are needed, and the fill material can be hauled away or reused elsewhere.

#6 Can Be Used for Lawn Parking

The grids themselves, without fill, can be used for temporary lawn parking with lightweight vehicles, and by spreading the load out, the lawn incurs less damage and the grids can easily be removed and stored for later use. For permanent expansion parking at venues like fairgrounds or music venues, the grids can be installed with a base of rock, then filled with sod or soil and grass seed to provide a durable parking surface that looks like a regular lawn when it is not being used. It can be maintained with regular lawn equipment, and unlike dirt parking areas, it will not turn into a muddy mess after a rain storm.

#7 Can Create Temporary Roads

Heavy equipment at construction sites or oil fields can cause damage to the surrounding soil, compacting it or creating ruts that make it difficult to traverse, especially after a rain storm. With permeable pavement, you can create temporary roads that protect the soil during construction or drilling operations. Afterward, the roads can be removed, and the site can be restored to almost original condition. With a bed of rock and gravel fill, the permeable pavement will be able to support the heaviest equipment, but can still be easy to remove.

#8 Eliminates Costly Drainage Systems

With a conventional asphalt or concrete surface, the parking area must be crowned and have a system of storm drains and pipes to control water during rain or flooding events. This can significantly add to the construction costs of the parking area, and if the system is connected to a municipal waste water system, there may be extra costs and permits required to install the drainage system. Permeable pavement allows any water that accumulates to drain through the surface and into the ground. This helps to prevent flooding and allows any aquifers in the area to replenish naturally.

#9 Can be Used for Erosion Control

In areas with loose soil, such as the arid southwest or on hills or slopes, permeable pavement can be used to retain soil and prevent erosion. Simply place the paving grids over the area that needs protection and fill it with gravel, or for a more natural look, soil and grass seed. It an also be used for landscaping purposes, to create walkways or decorative areas around trees or other structures.

Permeable pavement is an extremely versatile paving material and is a great value compared to asphalt or concrete. It creates a strong, durable surface that requires a minimal amount of maintenance, and it can be used almost anywhere.

———————

Sources:

http://truegrid2.jfcserver.de/permeable-pavement/

http://truegrid2.jfcserver.de/resources/environment/

http://www.deq.virginia.gov/Programs/Water/StormwaterManagement/ErosionandSedimentControl.aspx

 

[Posted on December 31st, 2015 by: Barry Stiles]

 

Today, most parking lots are made from either asphalt or concrete, which initially provide a smooth surface for parking , but are expensive to install and typically require periodic applications of sealant to keep them in good condition. Additionally, once constructed, an existing parking lot can be difficult and difficulty to modify as the parking needs for the facility change over time.

By using permeable pavers in place of conventional materials, the parking lot design process is much simpler, because complex drainage systems can be eliminated, the materials for filling the pavers are easy to acquire and the installation process is simple and quick compared to other materials. Thanks to the unique design of permeable pavers, parking lots built with them are also easy to modify or expand in the future, and if extra parking is ever needed, permeable pavers can be easily installed temporarily and removed at a later date.

Here are some of the most desirable benefits that permeable pavers have to offer in your parking lot design:

#1 Simple Installation

For parking lot applications, permeable pavers are very easy to install compared to asphalt or concrete surfaces. They require much less equipment, there is no curing time and the installation process is extremely fast.

First the site must be prepared, similarly to asphalt or concrete, by removing vegetation and grading the soil, followed by adding a layer of rock, in most cases, to create a stable base. Then the permeable paver installation begins by laying down the individual grids, which come in pallet-sized sections that can easily be maneuvered by a single person. Each grid covers a large area, making the process go quickly, and it has specially-designed tabs that lock it into neighboring grids, creating a single durable surface that still allows for expansion, contraction and other movement as temperatures change. Some of the grids may need to be trimmed to go around objects like light-posts or to conform to curves, landscaping, curbs or other features, and this can easily be done with either a manual saw or a power saw.

Once all the grids are in place, gravel, limestone or other materials are spread evenly over the tops of the grids, and compacted into place. Heavy equipment can be used throughout the installation process to make the job easier.

#2 No Complex Drainage Requirements

A concrete or asphalt parking lot is one contiguous, sealed surface. Without properly grading the subsurface, crowning the parking lot and installing drains and gutters, the parking lot will be prone to flooding, upheaval, cracking and damage from rushing water or moisture trapped beneath the surface.

Permeable pavers greatly reduce the drainage requirements in a typical parking lot design. Because water can move freely through the gravel or limestone surface, there is no flooding as long as the soil drains well, and there is no need for complex drain systems. A simple gravel drain or French drain will work well. In areas that freeze often, expansion and contraction from soil moisture will not cause the surface to crack or buckle, which happens often and causes significant damage in asphalt or concrete parking lots.

#3 Easy Parking Space Design

With asphalt or concrete parking lots, things like parking space width, length, orientation and number of lanes must be carefully planned during the construction process, and they are not easily changed afterwards without significant expenses. Once the lines are painted, the parking lot typically remains in a similar configuration throughout its useful life.

With a permeable paving system, you can easily create a parking lot design, and mark out parking areas, directional markers, lane markers and other elements using easy push-in plastic caps, which come in an assortment of colors. Should you determine that the design is inefficient or problematic, the caps can easily be removed and repositioned. With a bit of work, the entire parking lot can be redesigned, such as changing from a 60 degree parking layout with single-direction lanes, to a 90 degree layout with two-way lanes to maximize the number of available spaces. Lane widths can be changed, parking space dimensions, and nearly anything else, without incurring significant additional expenses.

#4 Creates A Durable Surface

Asphalt and concrete parking lots often have a set weight limit. Due to the expense of installing concrete or asphalt, the parking area is often rated for passenger vehicles, while main lanes are rated for heavy equipment. This reduces the cost of the installation, but it can result in damage if heavy equipment is driven over areas designed for passenger vehicles.

Once installed and filled with an appropriate material, permeable pavers can handle everything from small cars to heavy equipment like wheel loaders and fully-loaded 18-wheelers. The gravel fill provides an extremely durable surface that can easily withstand heavy loads, the elements and even snow removal equipment. When properly installed and compacted, very little maintenance is required to keep the surface in good condition.

#5 Temporary Parking Can Be Easily Added

If a facility’s need for parking suddenly increases, permeable pavers can easily be used to create additional temporary parking. The pavers can be laid down on the existing soil and filled with limestone, gravel or sod to create a temporary parking area. Once the parking area is no longer required, it can be removed with minimal effort and little disturbance to the underlying soil.

Permeable pavers can also be used to transform grassy areas into permanent parking, by filling them with soil and grass seed or sod, and allowing the grass to naturally grown in the pavers. The grass can then be trimmed by standard lawnmowers without damaging the pavers. Such parking areas are useful for parks, performing arts centers, fairgrounds or any other area that has an occasional need for an overflow parking.

In addition to being a good alternative to asphalt or concrete in parking lots, permeable pavers also work well for driveway surfaces, oil field roads, landscaping, erosion control, emergency access roads, fire lanes, and even helicopter pads. They are lightweight, self-anchoring, durable and very easy to install, use and maintain.

 


Sources:

http://truegrid2.jfcserver.de/

http://truegrid2.jfcserver.de/resources/installation/

http://truegrid2.jfcserver.de/parking-lot-design/

http://www.uh.edu/plantops/departments/fpc/design-guidelines/09_parking.pdf

http://www.vaasphalt.org/parking-lot-design/